RC Bike Summit

Here’s the complete bike KP10!! The view down the chassis, shows it’s a bit narrower than the KP09. Differences between the 09 and 10 are a few and very distinctive:The headstock is of a new design, 5mm shorter, but also with dual ball bearings, which means it’s sturdier, keeps the forks aligned in a better way and shortens the wheelbase just a tiny bit. The steering servo is mounted in a way that the servo horn is on the outside, now, and the crashbars are mounted further back on the chassis. The droop limiter is a better part now, sturdier and with better protection from crashes! The shock linkage is quite different, allowing the shock to be run with softer oils and springs… Source : http://www.steliosh.net/rcmoto/kp09e/index.html

This is an electric motorcycle that is a 1/6 scale model of the actual Harley-Davidson FLH-80. This is Kyosho’s electric motorcycle, following the Elek Rider and Motocross Rider. Especially, this model is a scaled version of Harley-Davidson, which is full of weight. Equipped with exclusive driver dolls, stands, cowls, lights, boxes and other decorative parts. The SDS, which is hard to tip over even when cornering with two wheels, has been further improved so that it can run freely from a minimum of 5 km / h to a maximum of 30 km / h. The RS-380 motor and other major parts are pre-assembled and semi-finished, and scaled resin wheels are equipped with hollow tires on both the front and rear wheels. The mechanism used is a 2-channel R / C system, the reception wing and the servo are housed inside the car body and doll, and the drive is

It seems to be the first r/c moto in the world to be sold as a completely two-wheeled motorcycle. Radio-controlled motorcycle DNA that originated from Japan about 40year ago.